PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Help me understand what my transmission numbers say. (http://www.peachparts.com/shopforum/showthread.php?t=406176)

Happycal 06-22-2020 05:50 PM

Help me understand what my transmission numbers say.
 
1 Attachment(s)
Put the car up on the rack and took a picture add the transmission number stamped into the side of the case. From the factory this car came is an automatic but was converted to manual transmission. It has a 5-speed now. I am attaching a photo the numbers on the case. Anyone can decipher it, please do.

Usaguy 06-22-2020 06:05 PM

Your transmission model is 717.411


In the US market it came in the W201 chassis

Happycal 06-22-2020 08:13 PM

Thank you. Is there a website that lists all the different Transmissions? Do you know the fifth gear ratio?

mpolli 06-22-2020 09:12 PM

According to this thread:

http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/395875-717-411-info.html

12th post,

It's .78

Happycal 06-22-2020 11:08 PM

Quote:

Originally Posted by Dr. Sternschnuppe (Post 3862084)
The 717.411 has ratios I. 3.91; II. 2.17; III. 1.37; IV. 1.0; V. 0.78; R. 4.27
The 717.435 has ratios I. 3.86; II. 2.18; III. 1.38; IV. 1.0; V. 0.80; R. 4.22

I copied this from the other thread. My car is turning approximately 2,200 at 65 miles an hour. Those are pretty tall gears from a not so powerful engine.

I'm going to start looking for the clutch kit with the flywheel. Everything I've read shows single Mass flywheel. Any suggestions,

Usaguy 06-23-2020 12:32 AM

Quote:

Originally Posted by Happycal (Post 4062953)
...My car is turning approximately 2,200 at 65 miles an hour. Those are pretty tall gears from a not so powerful engine.

I'm going to start looking for the clutch kit with the flywheel. Everything I've read shows single Mass flywheel. Any suggestions,


What is the year and model of your car ?

Happycal 06-23-2020 01:15 AM

1989 190d 2.5 NA 5 cylinder. It came with an automatic from the factory but previous owner did a swap for a 5 sp manual.

Happycal 06-24-2020 10:59 AM

Can you guys give me a list of what I would need to do a clutch job besides the obvious. Other things I should replace while the transmission is out. Are there any favorite brands?

bigpanda16 06-26-2020 10:47 PM

Effectively you should order parts for a 1986 190e/d as they went dual mass flywheel sometime 88/89. Google 717.411 or 412, there is a fair amount of info out there


All times are GMT -4. The time now is 05:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website