![]() |
|
|
|
#1
|
|||
|
|||
I have a 1985 Mercedes 300SD. The engine will not shut-off. I am determined to perform the repair myself. I replaced the vaccum shut-off servo located behind the injector which was an experience. Is there an ajustment for the vaccum shutoff servo which I replaced? The auto will not shut down with the key switch, nor the manual engine shut-off. The brakes perform fine, and the locking mechanism works well.
I would greatly appreciate any suggestions or information that anyone would graciously provide me. Thank you for any courtesy that is afforded. Best Regards Barb aviator@centuryinter.net |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Additives | Bill Wood | Mercedes-Benz Performance Paddock | 6 | 08-24-2011 10:53 AM |
Bled brakes, now engine won't shut off! | edge | Diesel Discussion | 5 | 04-12-2003 10:37 PM |
Engine doesn't shut off - vacuum problem | Rixter | Diesel Discussion | 8 | 01-18-2002 11:43 AM |
Engine shut off | baporter | Diesel Discussion | 3 | 07-03-2001 02:48 PM |
1983 240D Engine won't shut off! | Don | Tech Help | 1 | 04-13-1999 03:09 PM |