|
|
|
#1
|
|||
|
|||
Help me Identify a part Please
Hi Ya'll - I need to replace my Alternator but am unable to remove it. I checked various postings/ videos and Tech Articles but my 06 E350 is different from any I have gotten help from. There is no room to lower the Alt downward and pulling it out upward is blocked by a gizmo bolted to the right cylinder head. Looks like there are 3 or 4 bolts/screws holding it in place. I have a WSM but it's not very user friendly and I have been unable to find this part (mostly because I don't know what it is!) ;-)
It has several vacuum hoses going to it and an electrical connector also. Check out the photos -- hopefully they will help with the ID... TIA! |
#2
|
|||
|
|||
Maybe some purge valve????
|
#3
|
|||
|
|||
its the air diverter valve , use a 30 torx bit to remove the 3 bolts and dont drop the gasket, reuse it
|
#4
|
|||
|
|||
Thank you both! You've been very helpful! update - Got it out exactly as you described. Also removed the Alt and hopefully can install the replacement.
Last edited by l_turn9; 04-27-2021 at 03:57 PM. |
Bookmarks |
|
|