Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-08-2021, 03:57 PM
Registered User
 
Join Date: May 2021
Posts: 3
1972 MB 250 2.8 Zenith Carb question

Hello and help.

Has anyone ever removed dual zeniths on a 2.8 or similiar engine without removing the AC Compressor and the exhaust and intake manifolds?

The inner nuts are not visible, can be felt, but feel nearly trapped, and I have no tool that will get on those 13mms, stubbys, S type. I have no 13mm distributor wrench in my toolbox, but I dont think the box end will wrap around anyway, again they seem virtually tapped against the intake manifold.

Any ideas (other than an LS swap)?

Reply With Quote
  #2  
Old 05-08-2021, 06:56 PM
Registered User
 
Join Date: Sep 2011
Posts: 926
I definitely removed a set of zeniths to rebuild without removing any of the extras mentioned. I do think I remember the nuts on the bottom being some concern, maybe 1/12th a turn at a time or something like that, but I don’t have any special tools. This was on a 1970 250c.
__________________
Past mb: '73 450sl, '81 280slc stick, '71 250, '72 250c, '70 250c, '79 280sl, '73 450sl, parted: '75 240d stick, '69 280s, '73 450slc, '72 450sl,
Reply With Quote
  #3  
Old 05-09-2021, 03:13 AM
Registered User
 
Join Date: May 2021
Posts: 3
Thanks for the reply. I decided to go ahead and remove the entire exhaust/intake manifold assembly, cause I might as well get some
more serious housecleaning done.

All the bolts for the exhaust pipes came out and all 6 bolts that hold in the manifold came out no
big issues.

But darn it if that factory ac compressor isnt a bear. How in the heck do you remove it? I have the bolt mounted to the manifold out. Then 3 more bolts out, I even loosed up the main bracket bolt to the front out, loosed up the pulley to get the belt loose and I will be darned if minus all those bolts Ill bet I could hoist the engine up on that bracket still - its still bolted somewhere.

Any how tos on removing factory ac compressors on an old 250? I got to be missing some obvious bolt.

And this car swallowed one of my battery 3/8 wratchets today too! What gives there? I have it up on a lift, turned my head for a minute then heard crash boom bang... and she disappeared. This isnt a little teeny battery wratchet, I just dont know where it went to! I aint kiddin.

Keep life interesting I guess but those things are not cheap!

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page