|
|
|
|
|
#1
07-18-2021, 08:36 PM
|
|||
|
|||
|
M116/117 cam lobe dimension
Would someone use a micrometer/caliper and measure a known, good camshaft lobes from the base circle to the tip of the eccentric of the lobe? This is on #08 (intake) and #09 (exhaust) cams.
I have a cam which mic's out at 1.63" on the highest/thickest lobe down to 1.62" on the lowest intake lobe. Exhaust lobes ranged from 1.645" to 1.62". I realize some of the difference can be attributed to operator error as, while mounted in the car, the lobes can be quite tricky to get a "straight" shot in order to get a good measurement. Lobes show no sign of scouring.
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.” ― Brian P. Cleary, You Oughta Know By Now Last edited by Mike D; 07-20-2021 at 11:09 AM. Reason: Put in the proper measurements. 
|
| Bookmarks |
|
|
Threaded Mode
