w124 resealing windshield wiper gasket

[ambush276]

I just replaced my cabin filters, which were waaaay overdue. Everything went back just fine except the windshield gasket. It is on both grooves,but the top of the gasket doesn't seem to be as sealed as it was before. I saw on the peachparts guide to use 3m weatherstrip adhesive. Is it for this specific part? Is there a glue/adhesive i can use to keep that part sealed down but obviously still be able to be removed in the future when other repairs are required.

Is this what i should be using?
https://www.pelicanparts.com/More_Info/0019893120.htm?pn=001-989-31-20-MBZ&SVSVSI=W124&DID=57065

any advice on how to use it?

Thanks!