|
300ce transmission installation bolt question
Being brilliant and in a hurry, I had to put aside a 300ce transmission installation project until I could address something else. The little pile of bolts that connect the engine to the transmission went AWOL.
There are 10 bolts from transmission to engine. It looks like 8 are the same length and two are longer for the starter. Then there's the 6 bolts for the flywheel to the transmission. Also, there's the little bolt for the dipstick. I need M# sizes and lengths for these if anybody happens to have the details handy. Thx -CTH |
Never mind, I did the obvious. I dug out a spare engine and pulled a pair of bolts. -CTH
|
| All times are GMT -4. The time now is 07:49 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website