|
Oil Around Cross-Over Bolt M104
3 Attachment(s)
Just noticed today that there seems to be a bit of oil pooling around one of the bolts holding down the plastic intake cross-over pipe on top of my 97 SL320’s M104. Nothing else is wet or leaking. Car has 56k miles on it. Any thoughts?
- Mike Attachment 166919 Attachment 166920 Attachment 166921 |
Nothing of concern as far as it being a problem. It’s just an annoyance likely caused by seepage through the threads on the stud into the valve cover. If you’d like to fix it the stud would probably have to be removed and sealant sparingly applied to the threads.
Do double check that hose next to the stud/nut for porosity. Leave it alone unless it bothers you. |
| All times are GMT -4. The time now is 09:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website