m102 2.0 high compression built
 

Hello everyone,

I'm looking for help for building a m102.962 with 10:1 to 10.5:1 CR.
From what i read the only way I see this happening is by grinding 1mm off the head.

The engine will be with free flow exhaust and custom headers. Also in time I'll put a proper fuel system with Megasqurt ECU.

The goal is to hit about 150/160hp on crank

I'm open for suggestions

Thank you :)

One suggestion... dont raise your redline. Those are relatively heavy pistons for those rods and 7k will make very bad things happen.

I was thinking about raising it to 7500, and i would’ve expected something to happen at 7500 but at 7000.
So far i didn’t find any way to make at least 140 on crank without turbo but still i wanna try out the NA built.