PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)

- Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)

- - cruise inop (http://www.peachparts.com/shopforum/showthread.php?t=42849)

Sterling Gee

07-25-2002 04:42 PM

cruise inop

I have a 95 e320 with about 80K miles on it. The cruise works only for a few minutes before dropping speed. I'm assuming a vacum leak?

mbdoc

07-25-2002 05:45 PM

Cruise control on that car is 100% electronic. With MB scanner the control unit can be tested for operation.

Sterling Gee

07-25-2002 05:49 PM

Where is the control module located? I can at least check the connections...... before I take it to get scanned...

pentoman

07-25-2002 06:04 PM

You could check the fuses. MB fuses/ notoriously corrode at the terminals (on the fuse or the fusebox connections). I didn't believe it either, and my fuses all looked fine, but ancillaries like wipers started randomly stopping and starting, and this was the problem.

Cleaning the connections is a good way to reduce any future worries.

later

All times are GMT -4. The time now is 03:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website