|
Can you provide the normal amp reading of
good pump, Below/Above what reading should I be immediately concerned? |
Your fuel pump current drew is approx 7.5 Amp
should not exceed 10 Amps,If over replace it. The fuel delivery should get 1 liter after 40 sesconds or more. Hope that help ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
The pump isn't the thing that can cause the curent draw to exceed 10A, a plugged filter or screen at the fuel distributor can raise the amount of current the pump requires. Fuel delivery is measured on the fuel RETURN line & most M.B. pumps are rated at 1 liter(quart) in approx 30 sec. Hope this helps!
|
| All times are GMT -4. The time now is 12:13 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website