PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   300 TDT Vacuum (http://www.peachparts.com/shopforum/showthread.php?t=4389)

SteveB 06-10-1999 11:28 AM

I hope someone can help. My Vacuum system intermintently cuts out. It quits for two days and then mysteriously starts working again. I checked for vacuum pressure directly from the pump and it seemed low. What should the vacuum pressure be coming right out of the pump w/no accesories? Also, if it is the pump (perhaps a valve is sticking intermintently) is the rebuild a usually pretty reliable fix for most pump related problems.


------------------
83 TDT 110K

M.B.DOC 06-10-1999 09:16 PM

The fitting at the top of the vacuum pump where the brake booster line is connected is actuality the check valve for the pump. The check valve will fall apart, and the pieces can get stuck in other check valves in the front of the pump. The fitting is avail. seperate.

Benzmac 06-10-1999 10:55 PM

If you take off the fitting and take out the pieces with a magnet it should be fine. Just replace it with a new check valve after that.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM




All times are GMT -4. The time now is 10:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website