Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-08-2002, 10:37 PM
dennisdc
Guest
 
Posts: n/a
Thumbs up W124 Instrument cluster removal

I just wanted to share with you my experience in removing the instrument cluster in my 95 E220 W124.

I've read quite a number of threads regarding this and most of them were helpful but really a pain to do..... my patience run out.

Anyway, here's what I did:

1. Remove the black plastic cover just above the gas & brake pedals.

2. Pull out the light switch & unscrew the nut holding the light switch & cover.

3. Pull out the light switch cover gently towards you, then pull outwards to free the plastic clip/hook.

4. Gently pull out the ignition switch cover from the steering column end to free the plastic clip. Once the clip has been pulled out, pull the cover towards the steering column to free the plastic hook.

5. Once the plastic covers have been removed, unscrew all the 8mm screws holding the lower panel of the dash. 5 screws on top & 2 below.

6. Take out the lower dash panel & you should be able to access the lower back of the Instrument cluster and push it out.

Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page