|
|
|
|
|
#1
08-23-2002, 06:01 PM
|
|||
|
|||
|
W140 AC Question
I drive a 93 300SE. The dual Climate Controls have worked fine until now. When i turn the air conditioning to dual auto mode, and i turn the rotary dial in the center from "AUTO" to "MAX", i lose the blower motor. Is there a seperate relay for the Max and Auto functions? Is this a simple fix? Or is this gonna cost me $6000 and a new Evap. core?
__________________
"If I teach you half of what I forgot, you'll still have enough to compete with most people" 
|
|
#2
08-23-2002, 06:12 PM
|
||||
|
||||
|
Electronic blower regulator sounds bad. Apparently not uncommon as MB has issued an improved part. The new # is 140 821 83 51 , I believe (double check). The blower goes to highest when temp wheel turned to "MAX" and your highest circuit would seem to be out.
Edit:.... looks like joe p already addressed this issue in another thread... look there.
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) Last edited by jbaj007; 08-23-2002 at 06:17 PM.
|
|
#3
08-23-2002, 06:38 PM
|
|||
|
|||
|
Alright then, one more question
Is this a cheap part, where is found at on the car, and will the labor price be incredible?
__________________
"If I teach you half of what I forgot, you'll still have enough to compete with most people"
|
|
#4
08-23-2002, 07:22 PM
|
||||
|
||||
|
Check the previous thread http://www.peachparts.com/shopforum/showthread.php?threadid=44727
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later)
|
|
#5
08-24-2002, 12:59 AM
|
|||
|
|||
|
OH, I see it now.....
Thank You!
__________________
"If I teach you half of what I forgot, you'll still have enough to compete with most people"
|
 |
| Bookmarks |
|
|
Linear Mode
