Folks,

I've been away for quite some time... hope everyone's doing well.

I want to replace the pads AND rotors on my 94 E420. I have the pads (pagid) and a set of rotors which I ordered some time ago from the partsshop.

I also have 8 brake sensors, 2 packets of squeal paste, and 2 front wheel seals. Am I missing anything?

Changing the pads seem easy enough.. as it's described here: http://www.peachparts.com/e_class_brakejob.htm

It's the rotors I'm concerned about... done rotors on other cars before, but not this one. Any tips? Are there bearings that need to be greased? How tight does the bolt holding the rotor need to be?

Thanks

Willy

__________________
Willy

'94 E420 White

Mods
-------
Berg Werks Keyless Entry
Buzzer replaced with Chime
Dash Light Upgrade
Burlwood/Leather shift knob
Alpine CDA-9815 Head Unit
2002/2003 16" C Class 7-Spoke Wheels
Updated "Chip" to fix Code 19 problem