|
|
|
|
|
#1
06-23-1999, 01:04 AM
|
|||
|
|||
|
pls give advise. the memory seat switch is not working. can't get the driver seat to both pre-set positions. however, the seat adjustments is fine. what can i do or check to have this fix? should i change the switch or what other components are needed?
thank you. noth [This message has been edited by NothiMB16 (edited 06-23-99).] [This message has been edited by NothiMB16 (edited 06-23-99).] |
|
#2
06-23-1999, 02:39 PM
|
|||
|
|||
|
from my experince, your power seat switch should be ok the problem could be the control
unit under the seat. Try to switch control unit from right side to left side they are same part see if works Check all connecters are tight. hope this help ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tire Rack Options for 190e 2.3 16v suspension | superchargedm3 | Mercedes-Benz Wheels & Tires | 7 | 05-30-2003 06:43 PM |
| Seat motors '91 190E 2.3 - FYI for DIY | sbourg | Tech Help | 0 | 11-07-2002 10:44 AM |
| 190e 2.3 16v engine rebuild | brockley | Tech Help | 2 | 01-03-2002 02:39 PM |
| 15X7 C-Class Wheel on 87 190E 2.3 16V | troydewan | Mercedes-Benz Wheels & Tires | 1 | 06-09-2000 05:34 PM |
| Best tire for 190e 2.3 16V? | Bill Wood | Mercedes-Benz Wheels & Tires | 5 | 03-28-2000 03:55 PM |
Linear Mode
