|
|
|
|
|
#1
09-09-2002, 11:00 PM
|
|||
|
|||
|
Platnium plugs
Is it ok to use Bosch platnium plugs in the M-class? If so, what is the correct gap?
Thanks.... 
|
|
#2
09-09-2002, 11:26 PM
|
|||
|
|||
|
I believe they are like all other M112 V6's and are supposed to run on platinum plugs.
Gillybenztech moderates the ML, G-wagen, and Unimog forum, and I would probably repost this over there.
__________________
Paul S. 2001 E430, Bourdeaux Red, Oyster interior. 79,200 miles. 1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
|
|
#3
09-10-2002, 12:22 AM
|
|||
|
|||
|
I believe that the ML320, ML430 and ML500 all take Bosch F 8 DPER plugs, 2 per cylinder, $6.03/ea. from FastLane.
Check your owner's manual for gap but I suspect they will come with the correct gap.
|
|
#4
09-10-2002, 12:31 AM
|
|||
|
|||
|
Good point. I completely forgot.
I ran platinums in my Maxima and in my G20, and I notice that platinum plugs always come pre-gapped.
__________________
Paul S. 2001 E430, Bourdeaux Red, Oyster interior. 79,200 miles. 1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
|
 |
| Bookmarks |
|
|
Linear Mode
