PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   removing the speedometor ON 190E 16V (http://www.peachparts.com/shopforum/showthread.php?t=45873)

vikor 09-09-2002 05:30 PM
removing the speedometor ON 190E 16V
 
HOW DIFFICULT OR HOW LONG OF A JOB WOULD IT BE TO REMOVE AND REPLACE THE SPEEDOMETOR ON A 190E 16V-1986. THE SPEEDOMETOR WAS FLUCTUATING ON ME AND NOW IT JUST STOP WORKING. THE CABLE TO THE TRAN IS IN TACK SO I GUESS I AM GOING TO HAVE TO REMOVE IT.
COULD I GET TO IT FROM THE BOTTOM OR DO I HAVE TO REMOVE THE DASH.
THANK YOU FOR YOUR REPLIES

mbdoc 09-09-2002 05:48 PM
That is not usually the speedo BUT the speedo cable that causes that problem.
Start by disconnecting the cable from the transmission FIRST. That will give enough "slack" to disconnect it from the speedo.


All times are GMT -4. The time now is 06:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website