![]() |
103 Waterpump issue
I'm stuck in the middle of changing the waterpump on my 1991 300TE 4matic. I can't seem to get access to the rear two bolts. I followed the steps in the CD but it gives no hint as to how to get those back two bolts out. It looks like I have to remove the intake manifold and I'm not sure that I want to do that. Any body have a hint?
TIA :confused: |
Paul
The top rear one is the only one that's hard for me. i bought a 13mm swivel socket, that helps alot. The bottom rear is fairly accesable with the correct length extension. Gilly |
The swivel socket Gilly mentioned is discussed in this thread.
http://www.peachparts.com/shopforum/showthread.php?threadid=6891&highlight=swivel |
Thanks guys, I hope that the swivel and sonme different extensions will work. What a PITA. I think they could have engineered the whole thing alot better, it's ok for the assembly line, but little thought given to service work!. :p
|
All times are GMT -4. The time now is 08:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website