New Noise-loud
 

ok , I TAKE MY 1986 300E TO GET A OIL CHANGE i come back drive home seems fine... than i go drop off a friend about 1 hour later and there is this SCREAMING almost like whisiling noise (like a dying BIRD) near the belt.. idunno wut this is but the belt seems fine i just viewed it with my eyes no cuts or anything .. but the noise is still there... if i put it in Neutral noise is still ther if i drive faster noise is more of a faster pace. any ideaS?

noisy belt
 

These belts always get noisy when its wearing out or getting loose. The noise is usually heard when you start the car in the morning and it really shrieks. Wakes up neighbours! About time you change to a new belt or get this belt spray which will reduce or eradicate the noise for a while only. Could also adjust the tension if that is the right thing to do at the moment. Good luck.

MY uncle said they most likely chd my aircleaner and my hoses and they prob hit something or some line/ vaccume line any idea wehre to look? like should i take off the air box? and look i dont know wut are the hoses and wut aren't any have a pic or something like.. they could have losened it a bit and its sucking in air making a noise.. idea?S

i just checked every line seems fine nothings touching the belt... i drove it around the block and it drove fine! but on the way home THE NOISE started.... half way through the ride.. its diffently near the right front side... almost right next to the intake near the grill just to the left of it seems like its the belt but its not.. i turned off my car and i can hear a dripping sound like if water or oil was spilling out and it sorta bubbled.. but it went away after about 3 mins ideas?

spray some lubricant on the alt pulley whle the engine is running.if the noise goes away it's your belt, tight or not. some times on the ribbed part of the belt the v shape is worn and the belt will just screach. if you do replace the belt try to muscle the new one on without loosening the tensioner.
paul

wd40?

noise from the engine bay
 

Did you look under the car and find any oil or coolant drips? My water pump gave way a few months ago and this coolant was sprayed all over the hood and engine area. It didn't make any mysterious noises though. To fix this, a new pump was installed and the belt and the tensioner were also changed. Hope you find the fault soon. Wonder if its your bearings making this noise??

ok , i think i know wut it is
I SPRAYED THE BELT WITH WD40, AND wut do u think its to tight? loose? should i just put a new one on it?

haha i forgot to add while spraying the belt THE NOISE WENT AWAY!!!!!! BUT............................ IT COMES BACK IN LIKE in like 30 secs to a min.

I can gaurantee it's the belt tensioner. Mine did the same thing. If you spray WD40 on one of the pullys it helps....for 5min...then comes back. I got mine fixed, it costs $500 tho, i know i got ripperd on that, but my dad help me pay for that one.
Good Luck

belt tensioner WUT IS THAT? lol can u explain ?

why can't i just get a new belt?

ight , thnx anyone know if i could check if its the belt tensioner ? where is it? any ideas wut to look for? b/c i just pay for it and make sure its broken ?

The Tensioner keeps tension on the belt, if it breaks it looses tension and you belt becomes loose. It's a commen problem on a 300E, needs to be replaced at some point. But go for this, get your belt replaced (if your not doing it) and have them look at the tensioner. If it's broken, they'll tell u and be ready to fork over some cash. I delt with it for like 2months it is prolly the most annoying sound ever.
Hope this helps

Belt tensioners last around 100K miles on a W124 (300E series) car. Maybe a little more, maybe a little less. Maybe a lot less if car wasn't maintained well before you bought it.
Parts (if you buy them from PartsShop) run around $325 (I did mine around 1 1/2 years ago) and the labor took me around 3 hours one Saturday.
My mechanic charges around $475 for parts and labor. If you're REALLY comfortable as a mechanic and have a BUNCH of good metric tools, give it a go. If you're not, PAY THE MAN. Also, spend the $30 or so and replace the belt at the same time. IT DOESN'T MATTER WHEN IT WAS LAST REPLACED, DO IT WITH THE TENSIONER.