![]() |
cruise control jumpy
Need a little advice on where to start here. The story.
95-E320 w/168k-km (about 100k miles). When the cruise control is engaged will driving in the 120km/hr to 130km/hr range, it will what I call surge...ie accellerate to a 1/2 km/hr faster then let off to 1/2km/hr lower than the set speed then repeat, all in the order of 2 seconds. This will repeat adnausium. Setting it to below 120km/hr (even 119km/hr) it doesn't do it. Where does the speed sensor get its signal? Does anyone have a schematic? Thanks Ron |
| All times are GMT -4. The time now is 08:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website