PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   engine swap for 87' 200E what will fit (http://www.peachparts.com/shopforum/showthread.php?t=50597)

dave bone 11-18-2002 02:09 PM

engine swap for 87' 200E what will fit
 
at 152,000 miles my piston rings have gone i've looked for and identical engine to swap but have been unsuccsessful does anyone know what engines would fit My engine is 2.0 litres 4 cyl, stomberg carb (petrol) with switchable sports auto box. Would an 230CE 1985 petterberg carb engine be suitable.

A. Rosich 11-18-2002 08:12 PM

Any four cylinder petrol engined manufactured for the W124 at the same production years as your engine should be a relative simple swap: 200E / 230E.

I think you may even fit an 220E with some additional work.

Forget about diesels.

A. Rosich
S320, 1998
E320T, 1995

franj 11-21-2002 04:50 AM

I think as long as the engine is compatible with your transmission, computer, wiring loom, tail shaft, you should be OK?

neileg 11-21-2002 05:19 AM

The early 190 carb engine is probably the same.

Are you sure the piston rings have gone? This engine is well known for valve stem oil seal wear, leading to oil burning. The seals can be replaced without removing the head. This is an effective and relatively cheap job.


All times are GMT -4. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website