|
Temp calibration
Is there anyway to calibrate the temperature guage? I know for a fact that the guage reads high and was just wondering if there is anyway to bring it more in line with the actual temp?
|
Yes, by adding a resistor to the connection at the sending unit.
AT 80C the resistance should be 67ohm. Try adding 4-5 ohms (1/4 or1/2 watt resistor) at the sensor if the reading is off by 3-5C. |
Thanks for the reply I will give it a try.
|
| All times are GMT -4. The time now is 01:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website