![]() |
|
|
|
#1
|
|||
|
|||
![]()
I have a 1991 w-124 (300E), American model (spec.)
I have the car in Europe ... and I have recently had the European lights installed. The Euro-lights look great, and have awesome performance. I had the Merceder dealer install them (which means that this was likely the FIRST time there monkies ever were in contact with a US Spec. Benz). This became obvious when they said that the entire wiring for the head lights needed to be swapped because of the wattage difference in the Euro-lights. Instead they left the old wiring in place and merely rewired the power via, the battery. The Euro-wipers look great as well. However, they never finish wiping in the same position. One or the other is pointed up, while the other is in some other position - usually the opposite down position. I asked the dealer about the problem. Their reply (guess) was that - it was the US spec. wiring and the US switch that is messing with the system - and that would need to be replaced. Really they did not know - but it was an expensive guess. I have not had them fix the wipers ...yet. I don't think they are correct about the cause of the problem. Can anyone please help me ??? Thanks!
__________________
Esquire: 1991 300E (Autobahn Modified) 1986 Trans Am (Race Modified) |
Bookmarks |
|
|