PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   On a 126, where does the wire from the oxygen sensor go to? (http://www.peachparts.com/shopforum/showthread.php?t=55808)

downsmith 01-28-2003 03:20 PM
On a 126, where does the wire from the oxygen sensor go to?
 
I am trying to find the connector so I can test it. Is it the one that crosses in front the shock pillar on the passenger side?

rudy 01-28-2003 06:36 PM
check the footwell, ..passenger side.

MikeTangas 01-29-2003 12:47 AM
Passenger footwell. Pull the carpet, then remove the false floor. Connections are at the lower left corner, cable enters through the tranny hump about 10 inches from the footwell.

downsmith 01-29-2003 09:13 AM
THANKS!

zcc 02-05-2007 03:25 AM
Quote:
Originally Posted by MikeTangas (Post 334043)
Passenger footwell. Pull the carpet, then remove the false floor. Connections are at the lower left corner, cable enters through the tranny hump about 10 inches from the footwell.
I'm looking too for the wires location. I went there to the passenger side and found four connectors, so which one is for the O2? My car is 560SEL 1989.

mbdoc 02-05-2007 08:07 AM
O2 sensor on the 1989 560SEL car has 2 connectors. One connector has 2 white wires & the other connector has a single green wire.


All times are GMT -4. The time now is 01:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website