![]() |
Transmission not shifting into final gear
Help,
The transmission on our '88 190e I don't believe is shifting into 4th gear. I assume it's a 4 speed. When the rpms' are at 3k, the car is doing 63 on a flat stretch of road. Seems awfully high to me. Is there something I can check that would prevent it from shifting or is there something that wears other than the synchros? Thanks, Kodiak |
I think that is the correct RPM for the speed. Yes you do have a four speed trans, but it starts out in second, not first, so your shift count is right.
To have it start out in first, from a standing start, mash the gas pedal and you will feel and notice the transmission "dropping down" a gear and a sudden surge of acceleration. This arrangement is for economy. Haasman |
really? Can anyone else concur with this? It just seems to be revving awfully high for that speed.
Thanks, Kodiak |
See this thread
More RPMs and MPHs I just went out and did a MPH vs RPM check, these are what I got for the '87 190E 2.3 automatic with standard recommended tire size: MPH---RPM 60-----2,800 65-----3,100 70-----3,300 75-----3,450 Needless to say, these are approximate. Haasman |
| All times are GMT -4. The time now is 09:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website