I am changing out my HU in my 1992 300SD. I can't get the Rear seat UPPER cushion out. I have the lower cushion out, the 3 bolts holding the bottom of the upper cushion are out also. The 2 bolts under the first aid box are out alos. the cusion will hinge up, way up ( don't want to bend anyhting though) but it won't puch straight up or pull out. ANy ideas?

It is NOT a powered back seat.

Thanks
STEVE



Report this post to a moderator | IP: Logged

03-01-2003 11:55 AM