Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-23-2003, 08:28 PM
afmcorp's Avatar
Registered User
 
Join Date: Jan 2002
Location: NW Indiana LaPorte
Posts: 571
Clay All The Way

OH YEAH BABY!!

well i just got to share the news. my little 72 350sl has been abused for 2 winters now.

i bought it 11/01 drove it up to indiana from so fla and parked it in the drive. it had a fresh pro paint job that year. i left it there all winter. didn't do anything to it till 11/02 and i half heartedly polished it. i went all the way bought a variable speed polisher the one like a angle grinder. went to the local automotive paint supply bought all the foam pads, green tape, liquid polish you name it i bought it.

well the grinder was heavy and beat me up pretty bad holding it out at arms length. so after about 3 hours of work i had accomplished to get a somewhat decent shine but i could feel the little rough grit still in the paint.

so you'll know i live in nw indiana with all the steel mills and oxide mfgs and we get a pretty good amount of fall out.

after that polish attempt i finally got the garage cleaned out so we parked her in the garage. well that lasted only little over a month. had to do some work on the tractor/snow thrower. so out comes the 350. well it sat again during the snow and freezing tempts. so it has seen 2 indiana winters.

today i went out about 5pm (it's now 7pm) and i put the clay to it. now i couldn't find mequirers, didn't want to use mothers so i went with what the paint people used. it's called hi temp and i used mequires #34 as a lubricant.

the paint was terribly gritty and i think that was my problem when i attempted to polish her last year. just took too much effort to get the paint smooth and actually it never did get smooooth. slide a towel and it was like it had rubber skid pads. it just stopped.

well i washed the car and chamois dried it. then did the clay. i am here to say that clay is the way to get a smooooooth finish. no effort, no fuss even my wife was impressed.

if there is any doubt about clay just give it a try. it is like nite and day. now i know the polish will be much easier cause there is nothing really to drag down the application.

if i haven't said it before "man i love this forum".
Attached Thumbnails
Click image for larger version

Name:	350sl-a.jpg
Views:	229
Size:	62.5 KB
ID:	6972  
__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page