|
Removal of coolant lines for fuel distributor
On the top of the fuel distributor there are a couple of hoses that I understandare coolant lines.
To remove them, unscrew the fitting at the fuel distributor with counterhold on the hose end of the fitting (to prevent spinning of the hose)? Is a Flare-End Wrench required? |
| All times are GMT -4. The time now is 01:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website