|
Driver's power seat stuck...
in the down (back) and forward position (seat). I did a search and there is not a real solution for my problem. I disassembled and cleaned the switch with no luck. I believe it is the switch because the motors were working but, in only one direction...I will order a new seat switch but, if that does not work, the only other way is to remove the seat. The problem is, I can not get to the front bolts since they are covered by the seat. Anybody has suggestions for a cure or how to remove the seat...?
__________________
J.H.
'86 300E
|
03-06-2006, 07:53 PM
Threaded Mode
