Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-17-2000, 06:54 AM
Registered User
 
Join Date: Feb 2000
Location: Philippines
Posts: 157

I measured my front end the right side was lower by about 1/2 inch. It's pretty obvious too when you look at the car from up front. Any ideas where I should check first? Could a faulty wheel alignment cause this? I checked my tie rods and the needed to be replaced. Was wondering if tie rods can be significant to height.

Thanks!

Francis
85 300D W124 (Euro)


Reply With Quote
  #2  
Old 03-17-2000, 08:37 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
First the steering linkage is affected by height but does not cause height problems.

On the 124 body the strut plays a larger role in the geometry of the suspension than previous shock systems and a broken piston or deflated pressure could alter the height.

To a certain extent worn (or deflected) lower control arm bushings will cause the arm to extended and the front end to squat. This should be apparent in alignment and is only a problem if not alignable to proper camber.

Of course the main determinant of height is the spring system. MB gives four rubber cushion thicknesses (four different part #s from 8mm to 23mm) to correct height problems. Its a very uncommon procedure and is usually a cover for a sagged spring which should be replaced (in pairs). This kind of problem doesn't occur naturally till the later stages of a cars life (depending on driving conditions 200-300k or more I would think - its not a problem)



------------------
Steve Brotherton
Owner 24 bay BSC
Bosch Master, ASE master L1
26 years MB technician
Reply With Quote
  #3  
Old 03-17-2000, 11:54 PM
Daniel Pawlata
Guest
 
Posts: n/a
FRANCIS!

I have the same problem for few years and nobody can find the cose. I had 4 new springs and 4 new shocks put on 2 years ago and the problem is still there! Strut pads are also the same size. The driver side in front is lower than the pass. side noticeably. One mechanic even told me that this is happening becouse I drive almost always by my self with no passengers wich causes the left side of the car to be under load???
Let me know Francis if you have solved the problem.

------------------
'88 300 CE, SIGNAL RED
with 18" Carlson
Reply With Quote
  #4  
Old 03-18-2000, 01:45 AM
Registered User
 
Join Date: Feb 2000
Location: Philippines
Posts: 157

In my case the passenger side is lower. Will have the front suspension aligned this week and will upate you on what the outcome is.


Francis

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front end rattle - 124 Oreo Tech Help 14 12-12-2004 09:54 PM
87 300D Front end shudder when braking - tie rods? jksoft Diesel Discussion 7 11-08-2004 07:22 PM
Auto Trans Questions & Front End Looseness TROVERMAN Tech Help 1 09-08-2004 01:58 PM
Sudden Collapse of my Front End Alignment--Why? 83 240D Carrameow Tech Help 1 08-21-2003 09:50 AM



All times are GMT -4. The time now is 07:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page