|
I am in the process of getting the back windows on my car to function again. Is there some sort of special tool for crimping the head of the slide jaw stud to the window arm? I got the old studs out by drilling and they were crimped really tight. Also, do you put the jaw on the arm first and then thread it into the rail, or in the rail first? This is it folks, on on the last thing to drive the car. I cannot wait!!!! YeeeHawww!
Tom Johnson 85 Euro 280se W126 / M110 / 5spd |
Pull out the regulator, grind off the head of the old jaw, and use a hammer to peen the new one. Install into car.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
| All times are GMT -4. The time now is 12:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website