PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Baaaad noise in 300D...what is it??? (http://www.peachparts.com/shopforum/showthread.php?t=6917)

Larry Delor 03-30-2000 11:41 PM

OK, this may require some imagination...Today just before I arrived home, I noticed a noise that was not familiar at all. At first I thought it was part of the exhaust system, babging up against the chassis somewhere. It is not. I am going to attempt to describe this noise, in hope that someone has heard this before, and can help me. The noise is prominent at idle, but diminishes as I step on the accel. pedal, and then completely goes away when running at ±1500rpm. It sounds kinda like fanblades hitting a large diammeter rubber hose, like maybe a radiatior hose. It is not really a metallic sound. (clanging) more like bad drumming, but rhythmic with the engine at idle. "growl" comes to mind too.

Any ideas?? This has got me worried...I have to use the car tomorrow. I'd use the 280 but it needs tires and the carb linkage sticks something fierce-but that is for another post, when I am not working on an ulcer or something.

Thank you for your time!

-Larry

------------------
03/83 300D (184k) ...today anyway
07/73 280




[This message has been edited by Larry Delor (edited 03-30-2000).]

Crosbo 03-31-2000 12:24 AM

This happened to my wife and it turned out to be the vacuum pump shredding itself.

------------------
'89 300E 3.0
'82 350SD

Larry Delor 03-31-2000 07:24 AM

Thanks for the reply...
I don't know if its the vacuum pump, in my case, the sound seems like it is coming more from the central/rear part of the engine. ...and maybe this is my imagination, but it seems louder on the turbo side. The vacuum pump looked to be in good shape when I had it apart 30k ago.

...fearful in FL...

-Larry

------------------
03/83 300D
07/73 280



Chris Blanchard 03-31-2000 10:38 AM

I may be able to shed a bit of light on this one...

Check to see if the air cleaner assembly is vibrating against a bracket for some of the throttle linkage on top of the valve cover. When I bought my 85 300D, the air cleaner bracket was broken and the air cleaner did not vibrate much. Once I replaced the air cleaner bracket (easy except there is one really tricky bolt at the bottom) the air cleaner would vibrate and make quite a noise at idle. Revving the engine a bit (say, to 1000RPM) would make the noise go away until I let off the fuel and it returned to idle, whereupon it would make that awful noise again.

My mechanic (Precision Motorcars in Cincinnati - hello Aaron!) said that this was typical and that they had devised a "fix" for this situation. They recommended that you get an old air cleaner mount bushing, saw it in half, and attach it to the side of the air cleaner housing so that it acts as a cushion between the air cleaner housing and the throttle linkage mount. You have to drill a small hole in the air cleaner housing and bolt it on.

I haven't tried that yet, as my car has other issues at the moment, but I can't imagine a downside to this suggestion.

Hope this addresses your noise, or at least has helped someone else who faces the same situation as me.

Good luck!

Larry Delor 03-31-2000 04:10 PM

Well, guess what!?

Gues what "fell off" again for the third time? You guessed it! That big ole bolt that hold the harmonic balancer on! This time it was held on by loc-tite...or so i was told. Why is my car trying to commit suicide???

I am at work...I'll give more details along with questions later...thanks all.

-Larry :(

------------------
03/83 300D
07/73 280



LarryBible 03-31-2000 04:24 PM

Larry,

If your harmonic balancer keeps throwing the bolt or other related problems, it would seem to indicate an extreme imbalance or other pulsation. Has the engine ever been apart? It sounds like it has been.

If it happens once, okay, things happen. But multiple times sounds like something that loc-tite, or maybe even welding on the front pulley can't fix.

Best of luck

------------------
Larry Bible
'84 Euro 240D, 516K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles

Larry Delor 03-31-2000 10:14 PM

Well Larry, you may be on to something there as far as the enigine being apart at one time... The #1 and the #5 piston were replaced at 132k. The engine does "bounce around" a little, but I assumed that new motor mounts ought to lessen that, and that the new pistons probably have a little better compression than the other three, adding to the shaking effect.
This has me really frusterated...to the point that I actually looked at used Jap. cars today. (forgive me-I am under a little stress). The car otherwise runs great, and I am happy with it.

thanks for any insights/comments

-Larry (no longer bragging about the reliability of his 300D)

------------------
03/83 300D
07/73 280




All times are GMT -4. The time now is 08:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website