When I close the door on my 91' 500sl the side mirrors will move slightly. Is there an adjustment that would tighten the mirror(the glass portion) to whatever it is attached to?
|
Touch the glass with your finger in all four corners. If you detect any free motion then the most likely problem is in the mirror follower jack screws. These can wear out if the mirror is adjusted to the stops frequently, or if someone has forced the glass out of the position provided by the adjustment motor. This is a sturdy mechanism, but it can be broken by any type of excessive force.. Good Luck..
------------------ Jeff L 1987 300e 1989 300e 1987 BMW 325 [This message has been edited by jeffsr (edited 04-03-2000).] |
The break away feature uses a spring to hold the mirror in, many times the pot metal will break.
------------------ Benzmac: Donnie Drummonds 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 02:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website