PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   hid and shimmy problems (http://www.peachparts.com/shopforum/showthread.php?t=69761)

dimas 07-10-2003 11:21 AM

hid and shimmy problems
 
why does the left control unit that controls the left xenon light on my S500 keep needing to be replaced.It will work for a day or so after being replaced with a new one, and at 500 dollars a pop I can't keep replacing it.what could the problem be .Please help,I am going nuts.


second question,I get a bad shimmy at about 45 mph I changed the shocks, the steering damper ,the bearings,did a wheel alignment 4 times ,balanced the tires 4 times and it's still there.
what else could it be?

gfst8 07-11-2003 09:03 PM

It is possible that your lower control arm bushings are worn, just a thought.

Benzmac 07-11-2003 11:16 PM

If you do not have enough power or a good ground to the control unit, it will cause major problems.


All times are GMT -4. The time now is 12:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website