![]() |
Block Drain 450SE, Where???
Help, I'm stuck in the middle of this and running out of time. I thought the block drain might have been that 19mm bolt in front of the starter but it was not.
Is it the 20something mm bolt next to the oil filter housing? 1974 450SE W116 Thanks |
Drain plug location ?
Hi Josh, I don't have a W116 but I looked in EPC and it appears it's located on the drivers side, just next to the motor mount, front. High, just below head surface. I hope that was correct. Take a look anyway.
partsman |
Block drains on my 4.5 look just like 19mm bolts. There is one on each side. Remove the plug and I can almost guarantee nothing will come out. Once the plugs are out take a small screw driver or awl and poke it through the crud build up that is sealing the drain. I promise water will come out once you have the plug of crud cleared.
|
All times are GMT -4. The time now is 06:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website