I have a 220SEb and the master clutch cyl has failed for the third time in three years. The FAG type master is worn on one side on both the piston and the cylinder wall. What is the problem and how can I fix it. Thanks Mike

62 220SEb
72 250C
65 600 SWb

[This message has been edited by Mike Cook (edited 04-16-2000).]

Is it possible that the drive rod bearing or bushing is worn? This will cause some drag.

------------------
Benzmac:
Donnie Drummonds
1992 500E (very soon I hope :)
1981 280GE SWB
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM