Well, I finally found the time to troubleshoot my engine management problems. I checked the TPS, It was working correctly. I then realized what i did to the engine that made it run in "open loop" (I believe that is what it's called.) operation. I placed a resistor on one of the thermal sensors on my cyl head to compensate for the original hesitation problem 3 years ago. I have since removed the resistor and was then able to adjust my CO back to the 45-50% range. A little rich won't hurt, right? Anyway, I am very pleased with the results! My car uses less gas and doesn't make you gag from the exhaust fumes anymore. Surprisingly the cats and the O2 sensor seem to be intact as well. That amazes me after heavily driving the car for 3 years in that condition, 18%,,, WOW, That’s rich!
I would like to thank everyone for their input, I couldn't have fixed it without your help!
Thanks Again!
Adam

__________________
Current Stable:
01 ML55 AMG
92 500E (a few mods)
87 300E (lots of mods)
00 Chevy 3500HD Diesel Box Truck
68 18' Donzi Marine
06 GT i-Drive7 1.0 Mountain Bike (with GPS!)

PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320