![]() |
I have a 1990 126 with a electrical problem in the fuse box ? I noticed that the high beam would not come on when pulling up on the turn signal switch. I checked the fuse and it was okay. However they started working. So I look very closley at the fuse and replaced it. The high beam worked for a week and again stopped working. They work okay on the lower position, bright to dim. I took my plyers and wiggled the fuse contacts and they started working again and then stop a week later.
Any suggestion Please. H. O. Tyler 560 SEL 300 SD 240 D |
Clean the contacts and replace the fuses, soujnds like a corrosion problem..
------------------ Jeff L 1987 300e 1989 300e 1987 BMW 325 |
| All times are GMT -4. The time now is 12:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website