Originally posted in the wrong forum (Parts!). Odometer repair help needed !
 

I pulled out the odometer in my 1984 380SE and got as far as the little plastic gear which sure enough, is worn out.

The gear is a press fit and it was not budging with the little tapping that I did on it.

What is the best way to remove the old brass sleeve (the gear disintegrated) ? What would be a good tool ? With the faceplate still on, there hardly a place to support the speedo in order to relieve the shaft.


Also, which end of the shaft should you try to push out - the end where the gear is or the other end where there is a black round magnet ?

Thanks,

Amit