PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   300E PROBLEMS.....HELP! (http://www.peachparts.com/shopforum/showthread.php?t=7500)

300EVIL 05-15-2000 02:16 AM

i just got back tonight from driving my Mercedes from Florida to Illinois ( due to custom paint job and spoiler and air damn added). before i left my plastic thermostat housing, (which i replaced with an aluminum one) cracked. it sprayed coolant all over the place which caused me to have ignition failure. anyway, after that i had a series of problems when driving it home.
the auxerilary motorized fan will not run anymore therefore causing the engine to overheat when idiling in traffic. (yes, i checked the comnnection but, i still neet to see if its getting power or if the motor id still a complete sircut.)
secondly, it idles funny since then. its idling about 600 rpm's but it acts like its misfiring?? ( new rotor,cap and spark plugs, the igniter is fine)
plus, the muffler is making this howlling noise loke those stupit exaust systems you hear om hondas and stuff.
your replys will be appreciated
thanks!

300EVIL 05-15-2000 02:30 AM

oh, i also forgot ot mention that thier is a slight shimming ing the vehiicle between 50- 60mph and 90 to 110mph especially when going down hills. is this a flex disk problem??? its worn, ive seen it.
thier is also this horrible on, off, thing i get with my cruse control especially when going down hills. not comfortable to use at all!!!

Benzmac 05-15-2000 09:52 PM

How hot did you get the engine?? You should do a compression test and check it. Also, there is a little hose between the valve cover and the intake, If cracked, it will cause the car to ilde poorly.

------------------
Benzmac:
Donnie Drummonds
1992 500E (very soon I hope :)
1981 280GE SWB
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


All times are GMT -4. The time now is 09:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website