Tranny trouble....Still
 

I have a '79 450 SL with 185K on it. Over the past week I spent most of my time under the car replacing subframe mounts, tie rods, steering coupling and a steering gearbox. I also thought I resolved my trans problem.........guess not.


I had a leaking modulator cap (o-ring was bad) that would cause poor shifts from 2nd to 3rd.....very slow shifts, with big time flaring. I replaced the entire modulator and took the car for a spin. Same trouble, but the shift from 1st to 2nd is now worse.

Question 1: Is this simply resolved with an adjustment on the modulator???

Question 2: How do I make this adjustment?? (I know where to adjust, just need to know how to properly set it)

Question 3: Could this be a sign of something more serious???


Thanks in advance,
Rich

I think this is what you need:

http://www.continentalimports.com/ser_ic20242.html

I have seen this site before. Is this the same concept as for a 107 chassis? I thought this page was geared towards diesel applications. If it the same idea, that would be great.


Thanks for the reply.


-Rich

Just wanted to say that my trans problems are now history. I made a few adjustments on the modulator, and presto. It feels like a whole new trans.

Thanks for the reply!!!!


-Rich