![]() |
w201 Auto transmission fluid and filter change
I have a servcie cd and it says when i do a fluid and filter change i should drain the fluid out of the torque converter via the drain pulg on the converter. So when i go back to fill the transmission back up with fluid via the dip stick tube will the torque converter fill back up then?
|
Yes.
Visit my site, I have many pictures on the procedure. |
Rik
Apologies for interrupting. Nice web site but I could not find the pictures you refer to. |
If it's like my (722.369) transmission, you'll drain out about 7 quarts from the pan and torque converter. Measure how much is drained out. To refill (per MB shop manual instructions), pour in 4 qts, start the engine, then pour in the remaining charge. Both transmission case and torque converter will be refilled during this procedure.
|
Its under the "Tune up" section of my W201 web page.
|
All times are GMT -4. The time now is 02:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website