PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Testing O2 sensor (http://www.peachparts.com/shopforum/showthread.php?t=75783)

yal 09-25-2003 10:48 PM
Testing O2 sensor
 
I found the following quote in an old thread by Barrie. What does he mean by "shorting the input"?


Quote:
Testing Sensor Element: measure the output voltage of the sensor ceramic (black wire) under full-rich conditions; create this condition by shorting the input to the ECU (green wire). Specified tolerance is 0.45 - 1.0 VDC. Mine measured 0.48, suggesting that the ceramic element is getting weak.

carman850 09-26-2003 10:36 AM
"Short the input " means connecting that input wire to the ground, you can either find out the ground wire from the connector and connect that input wire to it, or simply connect the input wire to any bare metal nearest to ECU.

yal 09-26-2003 11:51 AM
Thank you very much!:)


All times are GMT -4. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website