switching trannys 1970 250C to 1967 250S ?
 

Howdy
Ok I have a 1970 250C and it needs a tranny. I came across a 1967 250S tranny that is stick. My car was automatic. Will this tranny fit? How do I convert mine to a stick. THanks
Just got the 1967 250S home. If anyoone needs any parts off it let me know. Engine and tranny are gone.
Thanks

You will need a different driveshaft, the correct speedo gear, the clutch pedal and master cylinder, a manual tranny flywheel balance matched the the auto flywheel (see other posts on balancing, it's complicated), and a gearshift cover. Hole for the shifter (floor shift) is already there.

You could also fix up the column shift if you wanted, but I don't know why.

I could use the wood trim at the top of the front passenger door, I'm missing that bit.

Peter

Hi what wood part did you need for your benz?? I think I have pretty much all the wood trim. I'll take a pic and post later.

Jennifer:

The top piece on the front passenger door, with screws. There are three parts, I only need the top one.

Thanks!

Peter

I don't think the 250S trans will fit in the 250C - the 114 body needs the type with the shift levers on the side. The 250S' shift mechanism is on the top TTBOMK.