I recently took out my steering box and when I put it back on, the steering wheel was a bit off. I had to take out the steering wheel and "center" it.

What happens now is that when I use the turn signal on one side, I have to manually flip it back and to the other side - it flips back with just a slight turn.

Is there a way to adjust this without removing my steering box again?


Thanks!

------------------
94' E280 Euro
85' 300D Euro
87' 250D Euro
77' 300D Euro
Manila, Philippines

You have to move the flex joint on the sector. You can't just move the wheel. It will throw every thing off!!!


------------------
Benzmac:
Donnie Drummonds
1992 500E (very soon I hope :)
1981 280GE SWB
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

How does the flex joint look? Is it that "joint" (with 6mm Hex screws) that connects the Box and the steering shaft?

How do I put the steering in center position from the left and right? This is when the box is not connected.


Thanks!