|
|
|
|
|
|
#1
|
|||
|
|||
|
On my '87 190D (OM602.911) when the dehumidify button (the one above the AC) is pushed, I get cold air (w/ compressor engaged) from center vents, but hot from outer. With AC button depressed, compressor cuts out after about 45 sec.
I've checked and cleaned feedback potentiometer electrical connnection behind the glovebox, checked the serp belt tensioner, filled up on R134 -- and I'm getting a good used N6 Klima Compressor Control to snap in there. Any other suggestons? TIA Oh, and thanks to Benzmac for help with vacuum control valve. Changed it today, and for the first time, the tranny shifts SMOOTHLY! Thanks. Chip Hannay '87 190D '84 300D |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 91 300SEL - Idle drops when A/C is on | Mike Murrell | Tech Help | 2 | 09-05-2003 09:27 AM |
| Noisy A/C compressor clutch. | Tinker | Tech Help | 3 | 09-04-2003 09:07 PM |
| Am I being taken advantage of? A/C rip-off? | HGV | Tech Help | 5 | 08-05-2003 12:38 PM |
| 1988 300 SEL, A/C, not used for long time? | rbellamy1 | Tech Help | 4 | 07-18-2003 04:46 PM |
| ? Signs of a failing A/C clutch or compressor? | DIYBenzer | Tech Help | 1 | 05-16-2002 07:56 AM |