The fluid tank for the windshield washer fluid on my 300CE is loose -- tank is not "fixed" and moves around.

Is there a bracket/clip that I need to anchor it down ??

Thanks -- Manuel

It should be anchored fairly securly, you may have to remove your intake air box to see where it attaches.

There is a circular hole at the bottom (near the front of the tank) that it fits into. Also a screw-on bracket that anchors it at the back of the tank.

Had to repair the bracket, and now its all fine.



The repaired bracket is on the left side of the picture; the "hole" (not visible) is somewhere on the right side, just behind the headlamp unit.