Cylinder Torque Settings
 

Hi friends,

I am planning to do an overhaul on my M103. Are there any specific torque settings for the cylinder head, etc. Any help would be appreciated.

Thanks.

Rgds

Cylinder Head Torque Settings
 

Anyone? Thanks in advance.

yes there are torque specs. Do you have a manual (CD)? I would suggest getting one if you don't. There is an initial torque then two angle turns. You will need to measure the cylinder head bolts to insure that they have not stretched beyond spec too.

The W124 CD says 50Nm and 90-degrees twice, the W126 and W201 (per Gilly) CDs say 70Nm and 90-degrees twice.

Sixto
95 S420
87 300SDL
83 300SD ... $950, see cars forum

thanks
 

Noted guys. Thanks!!