|
|
|
#1
|
|||
|
|||
I noticed that some of you guys have a 300TEs, and or have knowledge of this car. I have lowered the suspension on mine and I feel the rear end is still to high. Is it because of the Self leveling suspension in the rear. Also, even after the new springs the passenger side still seems higher than the drivers side(the ride height). Parts included H&R springs and 8mm pads on all four corners. Any advice on the rear end would really be appreciated.
|
#2
|
|||
|
|||
The term self-leveling means just that. If the rear of the car Is lower due to weight OR in your case shorter springs the system sends pressure to raise system. You will have to adjust rod on leveling valve so that car will come down (longer). May take a couple of times to get desired results. The rod hooks to rear anti-sway bar.
|
#3
|
|||
|
|||
Sounds easy enough. Is this something I can do myself. I will supply pictures when I'm done, If it works out okay!
Cardude |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wagon rear suspension valve rebuild | lrg | Diesel Discussion | 11 | 10-04-2006 06:02 AM |
What has gone wrong with my rear suspension???? | Jackd | Tech Help | 27 | 05-07-2005 06:00 AM |
Self Leveling Rear Suspension Fluid Replacement | d2bernhard | Tech Help | 10 | 02-05-2004 06:33 PM |
rear suspension | josev | Tech Help | 11 | 11-20-2002 10:57 PM |
300TE Rear Suspension | ATATEXAN | Tech Help | 1 | 07-30-2001 03:28 PM |